Resources

DMX Guides for AI-Controlled Lighting

Build a solid foundation so AI-based DMX automation lands safely in your space. Each guide links back to the main AI DMX controller page for context.

Series

Getting Started with DMX Lighting

A structured, beginner-to-intermediate guide series that explains DMX lighting control from first principles to modern, scalable setups. This series covers DMX fundamentals, addressing, wiring, networking, and best practices - with a modern perspective shaped by the Y-Link platform.

Series

Russebuss & Russevan: Lys som funker

En praktisk steg-for-steg guide-serie for russebusser og russevaner som vil ha lys som faktisk funker. Serien dekker valg av utstyr, strøm, DMX-oppsett og styring av lys slik at det føles synket med musikken – uten kaos, auto-modes eller tilfeldige feil.

DMX Controller vs Software: Which Should You Choose?

A practical comparison of hardware DMX controllers and software-based solutions, with guidance on choosing the right approach.

DMX512 Protocol Explained: Timing & Frames

Learn how DMX512 frames work: break, MAB, start code, slots, refresh rate, and timing fixes.

DMX Node Setup: Art-Net & sACN to DMX

Set up DMX nodes correctly with IP basics, universe mapping, and a clean wiring checklist.

DMX Cable Length Limit: How Far Can You Run DMX?

Learn real‑world DMX cable length limits, what reduces distance, and when to split the line.

DMX DIP Switch Addressing Chart (1–512)

Use this DIP switch chart to set DMX start addresses fast and avoid overlaps.

DMX Wiring Guide: Cables, Pins, Termination

Wire DMX correctly with the right cable, pinout, polarity, daisy chain, and termination.

3-Pin vs 5-Pin XLR for DMX: Pinouts, Adapters, and Common Mistakes

Learn the difference between 3-pin and 5-pin DMX XLR connectors, correct pinouts, adapter wiring, and common failure points.

DMX Channel Modes Explained

Clarify DMX personalities, fine channels, and how to pick modes for different venues.

How to Build a DMX Fixture Profile From a Channel Chart

Guide to reading channel charts, mapping parameters, and creating reusable fixture profiles.

PreviousPage 1 of 5Next